REMOTE CAMERA ARM
This modular remote camera arm is designed to be used on the back of our camera cars or our process trailers. The arm design is based on a three-sided truss.
The post plumbs electrically (12-volt) with fingertip controls.
|
BASIC ARM
|
| • Camera to post = 13' (pre-packaged with 2.5' extension = 15.5') |
| • Post to back of lidded weight box = 5'6" |
| • Weight ratio ± 2.9 to 1 |
| • Payload rated at 250+ lbs., easily enough for any remote camera device including Wescam, Spacecam, etc. |
MODULAR SECTIONS
|
| • 5' and 2.5' sections allow extension of height and reach of camera and weight box. |
| • Maximum design length = 25.5' reach |
WEIGHT RATIO / LENGH DATA
|
| • 13' reach = 2.4 to 1 |
| • 15.5' reach = 2.9 to 1 |
| • 18' reach = 2.5 weight box extension = 2.25 to 1 |
| • 20.5' reach = 2.5 weight box extension = 2.6 to 1 |
| • 23' reach = 2.5 weight box extension = 2.9 to 1 |
| • 25.5' reach = 2.5 weight box extension = 3.2 to 1 |
LENS HEIGHT
|
| • Approximately equal to the reach. |
RATES
|
Complete basic arm with power supply, 2.5' modular extension and counterweights: $300/ day. Camera car driver functions as crane technician. Additional extensions: $100/ day.
|
